China Wholesale Button Sensor Factories – Wi-Fi AP/STA module,fast roaming for industrial automation, SW221E – MoreLink

China Wholesale Button Sensor Factories –  Wi-Fi AP/STA module,fast roaming for industrial automation, SW221E – MoreLink

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

With the "Client-Oriented" business philosophy, a rigorous quality control system, advanced manufacturing equipment and a strong R&D team, we always provide high quality products, excellent services and competitive prices for Coaxial Cable Cord, Spectrum Analyzer Tool, Docsis 4.0 Modem, All products come with good quality and perfect after-sales services. Market-oriented and customer-oriented are what we have been being after. Sincerely look forward to Win-Win cooperation !
China Wholesale Button Sensor Factories – Wi-Fi AP/STA module,fast roaming for industrial automation, SW221E – MoreLink Detail:

The system block as below:

 

1

Features

♦ WiFi Solution: QCA6174A
♦ MT7620A, embedded MIPS24KEc (580 MHz) with 64 KB I-Cache and 32 KB D-Cache; 1x PCIe, 2x RGMII
♦ QCA6174A, 802.11 a/b/g/n/ac WiFi 2T2R Single Chip, provides the highest PHY rate up to 867 Mbps
♦ WiFi 2.4G and 5G are switchable (Change mode will be taken an effect after rebooting)
♦ WiFi Mode: it can be configured as STA (Default) and AP mode by SW

♦ Support Windows version: Windows XP, Explorer6 and above version of it
♦ Setting value can be backup/restore into/from file which is editable before restore to device
♦ Factory default settings are 5G 11n and STA mode
♦ Support Setup-wizard

♦ Support FW remote upgrade
♦ Memory: DDR2 64MB, SPI Flash 8MB

♦ GPHY: REALTEK RTL8211E, 10/100/1000M Ethernet Transceiver
♦ LAN: Gigabit Ethernet interface (RJ45) x1
♦ Chip Antenna: x2, On-board, SMD Type; Peak Gain: 3dBi (2.4GHz)/3.3dBi (5GHz), Dual band
♦ Power Input Range: 5 to 24 VDC
♦ Super Small Package

Technical Parameters

Connectivity I/O Port
1. RJ45 LAN Port10/100/1000 Base-T(X)RJ45, w/shielding, w/o transformer, w/o LEDs, Right Angle, DIP
2. Power Connector Connected to Power Adapter (Voltage 24V); PA Pin Header, 1×2, 2.0mm, Right Angle, DIP
3. DC JACK Connected to USB interface cable;DC Jack, DC 30V/0.5A, ID=1.6mm, OD=4.5mm, Right Angle, DIP
4. INIT Connector Pin definition and function, please refer to the followingWafer Header, 1×2, 1.5mm, Straight Angle, DIP
5. DIP Switch Pin definition and function, please refer to the followingDIP Switch, 2-Position, Red, Right Angle, DIP
6. SMD LED 0603 WLAN LED: GreenLAN LED: Orange for GE (Giga Ethernet); Green for FE (Fast Ethernet)PWR LED: Green

DHCP Error LED: Red

Wireless (2.4G, 5G switchable)
Standard 802.11 b/g/n, 2T2R802.11 a/n/ac, 2T2R
Freq. Mode Switchable (Change mode will be taken an effect after rebooting)
Channel KR standard, it should support CN, US WiFi channel by FW update later
Antenna Chip-antenna x 2 MIMO
Roaming 10ms fast roaming (only support between same frequency)
Mode STA, AP switchableDefault is STA mode
WiFi 2.4G
Channel, 13Ch. Ch. 1~13, 2402~2482MHz
Standard 802.11 b/g/n
Performance 2T2R, PHY rate up to 300 Mbps
TX Power >15dBm @HT20 MCS7 @ Antenna Port
RX sensitivity -68dBm@20MHz, MCS7; -66dBm@40MHz, MCS7
Security WEP WPA WPA2
WiFi 5G
Channel, 19Ch. Ch. 36,40,44,48                  5170~5250MHzCh. 52,56,60,64                  5250~5330MHzCh. 100,104,108,112,116,120,124  5490~5630MHz

Ch. 149,153,157,161              5735~5815MHz

Standard 802.11 a/n/ac
Performance 2T2R, PHY rate up to 867 Mbps
TX Power >14dBm @HT80 MCS9 @ Antenna Port
RX sensitivity -74dBm@20MHz, MCS7; -71dBm@40MHz, MCS7; -61dBm@80MHz, MCS9
Security WEP WPA WPA2
Mechanical
Dimensions  89.2mm (W) x 60mm (L) x 21mm (H)
Weight TBD
Environmental
Power Input 24V/0.25A
Power Consumption 6W (Max.)
Operating Temperature 0 to 40 °C
Operating Humidity 10~90% (Non Condensing)
Storage Temperature -40 to 85 °C
MTBF TBD, which is based on the materials used by design and DUT, operates condition.

About the WiFi Speed

The link speed shown for the transmission rate in this produce specification, and elsewhere is the theoretical maximum value based on the wireless LAN standard and does not represent the actual data transfer rate.


Product detail pictures:

China Wholesale Button Sensor Factories –  Wi-Fi AP/STA module,fast roaming for industrial automation, SW221E – MoreLink detail pictures


Related Product Guide:

Dedicated to strict high-quality management and considerate shopper company, our experienced team associates are normally available to discuss your requirements and ensure full shopper gratification for China Wholesale Button Sensor Factories – Wi-Fi AP/STA module,fast roaming for industrial automation, SW221E – MoreLink, The product will supply to all over the world, such as: luzern, Amsterdam, Hamburg, Our monthly output is more than 5000pcs. We have set up a strict quality control system. Please feel free to contact us for further information. We hope that we can establish long-term business relationships with you and carry out business on a mutually beneficial basis. We are and will be always trying our best to serve you.
  • As an international trading company, we have numerous partners, but about your company, I just want to say, you are really good, wide range, good quality, reasonable prices, warm and thoughtful service, advanced technology and equipment and workers have professional training, feedback and product update is timely, in short, this is a very pleasant cooperation, and we look forward to the next cooperation!
    5 Stars By Erin from Ottawa - 2018.09.21 11:01
    Cooperate with you every time is very successful, very happy. Hope that we can have more cooperation!
    5 Stars By Irene from Swedish - 2017.08.18 11:04

    Related Products