OEM China Spectrum Analysis Basics - 1RU QAM Analyzer with Cloud, Power Level and MER for both DVB-C and DOCSIS, MKQ124 – MoreLink
Short Description:
Product Detail
Product Tags
Related Video
Feedback (2)
OEM China Spectrum Analysis Basics - 1RU QAM Analyzer with Cloud, Power Level and MER for both DVB-C and DOCSIS, MKQ124 – MoreLink Detail:
Product Detail
MKQ124 is a powerful and use-friendly QAM Analyzer intended to monitor and report the health of the Digital Cable and HFC network.
It’s able to continuously log all measurements values in report files and to send SNMP traps in real-time if selected parameters’ values over defined thresholds. For troubleshooting a WEB GUI allows remote / local access to all monitored parameters at the physical RF layer and DVB-C / DOCSIS layers.
MKQ124 is a powerful and use-friendly QAM Analyzer intended to monitor and report the health of the Digital Cable and HFC network.
It’s able to continuously log all measurements values in report files and to send SNMP traps in real-time if selected parameters’ values over defined thresholds. For troubleshooting a WEB GUI allows remote / local access to all monitored parameters at the physical RF layer and DVB-C / DOCSIS layers.
As the number of Digital Cable TV and DOCSIS subscribers keeps increasing worldwide and Quality of Service has become a significant element to reduce subscribers churn, MKQ124 is the ideal tool to achieve cost-effective 24/7 monitoring of the quality delivered to all points of a Digital Cable network. The cable operator can deploy it at the headend / hub, along the last mile, or at the subscriber premise.
MKQ124 is a sub-system as rackmount to continuously monitor frequency/amplitude/constellation/BER responses for all QAM channels. By using these monitoring parameters, operator can be proactive in correcting the cable quality issue and also to locate the area where degradation is impacting service.
Benefits
➢ Remote and local monitoring of the health of your CATV network
➢ Real-time and Continuous QAM monitoring
➢ High Accuracy for wide range power and tilt: +/-1dB for Power, +/-1.5dB for MER
➢ Validation of HFC forward path and transmission RF quality
➢ Embedded Spectrum Analyzer from 5 MHz to 1 GHz
Characteristics
➢ DVB-C and DOCSIS full support
➢ ITU-J83 Annexes A, B, C support
➢ User defined alert parameter and threshold, support two channel profile: plan A / plan B
➢ 2x RF in, 4x RJ45 (2x WAN + 2x LAN) ports in 1 RU
➢ RF key parameters accurate measurements
➢ TCP / UCP / DHCP / HTTP / SNMP support
➢ Standalone unit
Monitor Parameters
➢ 64 QAM / 256 QAM / 4096 QAM (Option) / OFDM (Option)
➢ RF Power Level: -15 to + 50 dBmV
➢ MER: 20 to 50 dB
➢ Pre-BER and RS correctable count
➢ Post-BER and RS uncorrectable count
➢ Constellation
Applications
➢ Both DVB-C and DOCSIS Digital Cable network monitoring
➢ Multi-channel monitoring
➢ Real-time QAM Analysis
Interfaces
| RF | Female F Connector | |
| RJ45 (4x RJ45 Ethernet port) | 10/100/1000 |
Mbps |
| AC Power Socket | 3Pin |
| RF Characteristics | ||
| Frequency Range (Edge-to-Edge) | 88 – 1002 |
MHz |
| Channel Bandwidth (Auto Detection) | 6/8 |
MHz |
| Modulation | 16/32/64/128/256 4096 (Option) / OFDM (Option) |
QAM |
| RF Input Power Level Range (Sensitivity) | -15 to + 50 |
dBmV |
| Symbol Rate | 5.056941 (QAM64) 5.360537 (QAM256) 6.952 (64-QAM and 256-QAM) 6.900, 6.875, 5.200 |
Msym/s |
| Input Impedance | 75 |
OHM |
| Input Return Loss | > 6 |
dB |
| Minimum Noise Level | -55 |
dBmV |
| Channel Power Level Accuracy | +/-1 |
dB |
| MER | 20 to +50 (+/-1.5) |
dB |
| BER | Pre- RS BER and Post- RS BER | |
|
Spectrum Analyzer |
||
| Basic Spectrum Analyzer Settings |
Preset / Hold / Run Frequency Span (Minimum: 6 MHz) RBW (Minimum: 3.7 KHz) Amplitude Offset Amplitude Unit (dBm, dBmV, dBuV) |
|
| Measurement |
Marker Average Peak Hold Constellation Channel Power |
|
| Channel Demod |
Pre-BER / Post-BER FEC Lock / QAM Mode / Annex Power Level / SNR / Symbol Rate |
|
| Number of Sample (Maximum) per Span |
2048 |
|
| Scan Speed @ Sample number = 2048 |
1 (TPY.) |
Second |
| Obtain Data | ||
| Realtime Data By API |
Telnet (CLI) / Web Socket / MIB |
|
|
Software Features |
|
| Protocols | TCP / UCP / DHCP / HTTP / SNMP |
| Channel Table | > 80 RF Channels |
| Scan Time for the entire channel table | Within 5 minutes for a typical table with 80 RF channels. |
| Supported Channel type | DVB-C and DOCSIS |
| Monitored Parameters | RF Level, QAM Constellation, SNR, FEC, BER, Spectrum Analyzer |
| WEB UI |
Easy to show the scan results in a web browser. Easy to change monitored channels in table. Spectrum for HFC plant. Constellation for specific frequency. |
| MIB | Private MIBs. Facilitate access to monitoring data for network management systems |
| Alarm Thresholds | Signal Level / BER / SNR can be set via WEB UI or MIB, and alarm messages can be send via SNMP TRAP or displayed on the webpage |
| LOG | Can store at least 3 days of monitoring logs and alarm logs with 15min scanning interval for 80 Channels configuration. |
| Customization | Open protocol and can be easily integrated with OSS |
| Firmware Upgrade | Support remote or local firmware upgrade |
| Physical | |
| Dimensions | 432mm (W) x 244mm (D) x 45mm (H) (Including F connector) |
| Format | 1 RU (19”) |
| Weight | 2250+/-10 g |
| Power Supply | 100-240 VAC 50-60Hz |
| Power Consumption | < 24W |
| Environment | |
| Operating Temperature | 0 to 45 oC |
| Operating Humidity | 10 to 90 % (Non Condensing) |
| Storage Temperature | -40 to 85 oC |
WEB GUI Screenshots
Monitoring Parameters (Plan B)
Full Spectrum and Channel Parameters
(Lock Status; QAM Mode; Channel Power; MER; post BER; Symbol Rate; Spectrum Inverted)
Constellation
Cloud Management Platform
Product detail pictures:
Related Product Guide:
Bear "Customer first, High quality first" in mind, we perform closely with our consumers and provide them with efficient and experienced services for OEM China Spectrum Analysis Basics - 1RU QAM Analyzer with Cloud, Power Level and MER for both DVB-C and DOCSIS, MKQ124 – MoreLink, The product will supply to all over the world, such as: Niger, Jeddah, Germany, we have 8 years experience of production and 5 years experience in trading with the customers all over the world. our clients mainly distributed in the North America, Africa and Eastern Europe. we can supply high quality products with the very competitive price.
By Queena from Swiss - 2018.06.30 17:29
This is a reputable company, they have a high level of business management, good quality product and service, every cooperation is assured and delighted!
By Iris from Paraguay - 2017.04.08 14:55
