Super Purchasing for 50 Ohm Coaxial Cable - ECMM, Wireless Gateway, DOCSIS 3.0, 3xFE, SMB Loop Through, HS132E – MoreLink
Short Description:
Product Detail
Product Tags
Related Video
Feedback (2)
Super Purchasing for 50 Ohm Coaxial Cable - ECMM, Wireless Gateway, DOCSIS 3.0, 3xFE, SMB Loop Through, HS132E – MoreLink Detail:
Product Detail
The MoreLink’s HS132E is a DOCSIS 3.0 ECMM Module (Embedded Cable Modem Module) supporting up to 8 downstream and 4 upstream bonded channels to deliver a powerful high-speed Internet experience. The integrated IEEE802.11n 2×2 Wi-Fi access point significantly improves customer experience extending range and coverage with high speed.
The HS132E provides you advanced multimedia services with data rates up to 400 Mbps download and 108 Mbps upload depending on your Cable Internet provider service. That makes Internet applications far more realistic, faster, and efficient than ever before.
Product Features
➢ DOCSIS / EuroDOCSIS 3.0 compliant
➢ 8 downstream x 4 upstream bonded channels
➢ Support Full Band Capture
➢ One 10/100 Mbps Ethernet for RJ45
➢ Two 10/100 Mbps Ethernet Signals for STB
➢ RF Loop Through to STB by SMB
➢ Software upgrade by HFC network
➢ Support SNMP V1/V2/V3
➢ Support baseline privacy encryption (BPI/BPI+)
Application
➢ DVB-C or Hybrid STB embedded CM
Technical Parameters
Protocol Support |
||
DOCSIS/EuroDOCSIS 1.1/2.0/3.0 SNMP V1/2/3 TR069 |
||
Connectivity |
||
RF | 75 OHM Female F Connector; One Loop Through by use of SMB connector | |
RJ45 | One 10/100Mbps Base-TX Ethernet port (RJ45) with LEDs | |
Signal Interface 1 | 2.0mm 2×18 Pin Header; The signals including: Two 10/100Mbps Ethernet, USB, +12V and GND. Pin Definitions see Table-#1 | |
Signal Interface 2 | LEDs Signal to Front Panel | |
RF Downstream |
||
Frequency (Edge to Edge) | 88~1002 MHz (DOCSIS) 108~1002MHz (EuroDOCSIS) |
|
Channel Bandwidth | 6MHz (DOCSIS) 8MHz (EuroDOCSIS) 6/8MHz (Auto Detection, Hybrid Mode) |
|
Modulation | 64QAM, 256QAM | |
PHY Rate | Up to 400Mbps | |
Signal Level | Docsis: -15 to +15dBmV Euro Docsis: -17 to +13dBmV (64QAM); -13 to +17dBmV (256QAM) |
|
RF Upstream |
||
Frequency Range (Edge to Edge) | 5~42MHz (DOCSIS) 5~65MHz (EuroDOCSIS) 5~85MHz (Optional) |
|
Modulation | TDMA: QPSK,8QAM,16QAM,32QAM,64QAM S-CDMA: QPSK,8QAM,16QAM,32QAM,64QAM,128QAM |
|
PHY Rate | Up to 108Mbps by 4 Channel Bonding | |
RF Output Level | TDMA (32/64 QAM): +17 ~ +57dBmV TDMA (8/16 QAM): +17 ~ +58dBmV TDMA (QPSK): +17 ~ +61dBmV S-CDMA: +17 ~ +56dBmV |
|
RF Loop Through (SMB) |
||
Frequency (Edge to Edge) | 88 ~ 1002 MHz | |
Loop Through Gain | >6 dB | |
WiFi (2.4G 2×2 11n) |
||
Standard | IEEE 802.11n | |
Chipset | MT7628NN | |
MEMORY | 64MB SDRAM | |
Flash | 16MB SPI Flash | |
PHY Rate | Max 300Mbps | |
Modulation Method | BPSK / QPSK / 16-QAM / 64-QAM | |
Frequency Band | 2.4 ~ 2.4835 GHz ISM Band | |
Spread Spectrum | IEEE 802.11b: DSSS (Direct Sequence Spread Spectrum) IEEE 802.11g/n: OFDM (Orthogonal Frequency Division Multiplexing) |
|
RF Output Power | ANT0/1: 2.4GHz >= 15dBm@11n; >= 16dBm@11g; < 20dBm@11b | |
AP / STA Firmware | Linux 2.6.36 SDK | |
Operation Mode | Green AP/STA | |
Receiver Sensitivity | ANT0/1: 11Mbps -86dBm@8%; 54Mbps -73dBm@10%; 130Mbps -69dBm@10% | |
Security | WEP,WPA, WPA2 | |
Antenna | 2xIpex connector | |
Networking |
||
Network protocol | IP/TCP/UDP/ARP/ICMP/DHCP/TFTP/SNMP/HTTP/TR069/VPN (L2 and L3) | |
Routing | DNS / DHCP server / RIP I and II | |
Internet Sharing | NAT / NAPT / DHCP server / DNS | |
SNMP version | SNMP v1/v2/v3 | |
DHCP server | Built-in DHCP server to distribute IP address to CPE by CM’s Ethernet port | |
DCHP client | CM automatically gets IP and DNS server address from MSO DHCP server | |
Mechanical |
||
Dimensions (TBD) | 133mm x 99mm x 20mm (Including Heatsink) | |
WPS Button | WPS Button | |
Environmental |
||
Power Input | 12V/1A | |
Power Consumption | 12W (Max.) | |
Operating Temperature | 0 to 40 oC | |
Operating Humidity | 10~90% (Non Condensing) | |
Storage Temperature | -40 to 85 oC |
Interface Pin Definition and Mechanical Characteristic
F Connector:
RF Loop Throughput: SMB, 75 OHM, Straight Angle, DIP
RJ45, w/Shielding, w/LED, w/o Transformer, Yellow, Right Angle, DIP
Signal Interface 1: Pin Header, 2×18, 2.0mm, K31, K32, Straight Angle, SMD
Table #1: Signal Interface 1 |
|||
Pin1 |
RX1+ |
Pin19 |
GROUND |
Pin2 |
RX1- |
Pin20 |
USB_DP |
Pin3 |
TX1+ |
Pin21 |
NC |
Pin4 |
TX1- |
Pin22 |
NC |
Pin5 |
RX2+ |
Pin23 |
NC |
Pin6 |
RX2- |
Pin24 |
NC |
Pin7 |
TX2+ |
Pin25 |
NC |
Pin8 |
TX2- |
Pin26 |
NC |
Pin9 |
NC |
Pin27 |
NC |
Pin10 |
NC |
Pin28 |
NC |
Pin11 |
NC |
Pin29 |
NC |
Pin12 |
NC |
Pin30 |
NC |
Pin13 |
NC |
Pin31 |
K |
Pin14 |
GROUND |
Pin32 |
K |
Pin15 |
GROUND |
Pin33 |
+12V |
Pin16 |
USB_DM |
Pin34 |
+12V |
Pin17 |
GROUND |
Pin35 |
GND |
Pin18 |
USB_DM |
Pin36 |
GND |
Note: NC-No Connect; K-No Pin
Signal Interface 2: Wafer Header, 1×6, 2.54mm, w/Latch, Straight Angle, DIP
Table #2: Signal Interface 2 | |
Pin1 |
GROUND |
Pin2 |
WIFI_LED_N |
Pin3 |
DOCSIS_DS_LED_N |
Pin4 |
DOCSIS_US_LED_N |
Pin5 |
DOCSIS_ONLINE_LED_N |
Pin6 |
CM_ACTIVITY_LED_N |
Reset Button: TACT Switch, 4P, Right Angle, DIP
Press and hold this Reset Button for about 1 ~ 3 seconds, this will enable WiFi WPS function.
Press and hold this Reset Button for at least 10 seconds, then Reset WiFi to Factory Default Settings.
PCBA, Mechanical Characteristic
TOP
BOTTOM
Product detail pictures:
Related Product Guide:
During the past few years, our business absorbed and digested state-of-the-art technologies the two at home and abroad. Meanwhile, our firm staffs a group of experts devoted to your development of Super Purchasing for 50 Ohm Coaxial Cable - ECMM, Wireless Gateway, DOCSIS 3.0, 3xFE, SMB Loop Through, HS132E – MoreLink, The product will supply to all over the world, such as: Angola, Frankfurt, French, So that you can utilize the resource from the expanding info in international trade, we welcome shoppers from everywhere on-line and offline. In spite of the good quality solutions we offer, effective and satisfying consultation service is supplied by our specialist after-sale service team. Product lists and detailed parameters and any other info weil be sent to you timely for your inquiries. So please make contact with us by sending us emails or call us if you have any questions about our corporation. ou may also get our address info from our web page and come to our company to get a field survey of our merchandise. We are confident that we are going to share mutual achievement and create strong co-operation relations with our companions in this marketplace. We're searching forward for your inquiries.
By Mark from Cyprus - 2018.11.11 19:52
This is a very professional and honest Chinese supplier, from now on we fell in love with the Chinese manufacturing.
By Ella from Bangkok - 2017.08.21 14:13