China Wholesale Best Cable Modem With Voice – ECMM, Wireless Gateway, DOCSIS 3.0, 3xFE, SMB Loop Through, HS132E – MoreLink
Short Description:
Product Detail
Product Tags
Related Video
Feedback (2)
China Wholesale Best Cable Modem With Voice – ECMM, Wireless Gateway, DOCSIS 3.0, 3xFE, SMB Loop Through, HS132E – MoreLink Detail:
Product Detail
The MoreLink’s HS132E is a DOCSIS 3.0 ECMM Module (Embedded Cable Modem Module) supporting up to 8 downstream and 4 upstream bonded channels to deliver a powerful high-speed Internet experience. The integrated IEEE802.11n 2×2 Wi-Fi access point significantly improves customer experience extending range and coverage with high speed.
The HS132E provides you advanced multimedia services with data rates up to 400 Mbps download and 108 Mbps upload depending on your Cable Internet provider service. That makes Internet applications far more realistic, faster, and efficient than ever before.
Product Features
➢ DOCSIS / EuroDOCSIS 3.0 compliant
➢ 8 downstream x 4 upstream bonded channels
➢ Support Full Band Capture
➢ One 10/100 Mbps Ethernet for RJ45
➢ Two 10/100 Mbps Ethernet Signals for STB
➢ RF Loop Through to STB by SMB
➢ Software upgrade by HFC network
➢ Support SNMP V1/V2/V3
➢ Support baseline privacy encryption (BPI/BPI+)
Application
➢ DVB-C or Hybrid STB embedded CM
Technical Parameters
|
Protocol Support |
||
| DOCSIS/EuroDOCSIS 1.1/2.0/3.0 SNMP V1/2/3 TR069 |
||
|
Connectivity |
||
| RF | 75 OHM Female F Connector; One Loop Through by use of SMB connector | |
| RJ45 | One 10/100Mbps Base-TX Ethernet port (RJ45) with LEDs | |
| Signal Interface 1 | 2.0mm 2×18 Pin Header; The signals including: Two 10/100Mbps Ethernet, USB, +12V and GND. Pin Definitions see Table-#1 | |
| Signal Interface 2 | LEDs Signal to Front Panel | |
|
RF Downstream |
||
| Frequency (Edge to Edge) | 88~1002 MHz (DOCSIS) 108~1002MHz (EuroDOCSIS) |
|
| Channel Bandwidth | 6MHz (DOCSIS) 8MHz (EuroDOCSIS) 6/8MHz (Auto Detection, Hybrid Mode) |
|
| Modulation | 64QAM, 256QAM | |
| PHY Rate | Up to 400Mbps | |
| Signal Level | Docsis: -15 to +15dBmV Euro Docsis: -17 to +13dBmV (64QAM); -13 to +17dBmV (256QAM) |
|
|
RF Upstream |
||
| Frequency Range (Edge to Edge) | 5~42MHz (DOCSIS) 5~65MHz (EuroDOCSIS) 5~85MHz (Optional) |
|
| Modulation | TDMA: QPSK,8QAM,16QAM,32QAM,64QAM S-CDMA: QPSK,8QAM,16QAM,32QAM,64QAM,128QAM |
|
| PHY Rate | Up to 108Mbps by 4 Channel Bonding | |
| RF Output Level | TDMA (32/64 QAM): +17 ~ +57dBmV TDMA (8/16 QAM): +17 ~ +58dBmV TDMA (QPSK): +17 ~ +61dBmV S-CDMA: +17 ~ +56dBmV |
|
|
RF Loop Through (SMB) |
||
| Frequency (Edge to Edge) | 88 ~ 1002 MHz | |
| Loop Through Gain | >6 dB | |
|
WiFi (2.4G 2×2 11n) |
||
| Standard | IEEE 802.11n | |
| Chipset | MT7628NN | |
| MEMORY | 64MB SDRAM | |
| Flash | 16MB SPI Flash | |
| PHY Rate | Max 300Mbps | |
| Modulation Method | BPSK / QPSK / 16-QAM / 64-QAM | |
| Frequency Band | 2.4 ~ 2.4835 GHz ISM Band | |
| Spread Spectrum | IEEE 802.11b: DSSS (Direct Sequence Spread Spectrum) IEEE 802.11g/n: OFDM (Orthogonal Frequency Division Multiplexing) |
|
| RF Output Power | ANT0/1: 2.4GHz >= 15dBm@11n; >= 16dBm@11g; < 20dBm@11b | |
| AP / STA Firmware | Linux 2.6.36 SDK | |
| Operation Mode | Green AP/STA | |
| Receiver Sensitivity | ANT0/1: 11Mbps -86dBm@8%; 54Mbps -73dBm@10%; 130Mbps -69dBm@10% | |
| Security | WEP,WPA, WPA2 | |
| Antenna | 2xIpex connector | |
|
Networking |
||
| Network protocol | IP/TCP/UDP/ARP/ICMP/DHCP/TFTP/SNMP/HTTP/TR069/VPN (L2 and L3) | |
| Routing | DNS / DHCP server / RIP I and II | |
| Internet Sharing | NAT / NAPT / DHCP server / DNS | |
| SNMP version | SNMP v1/v2/v3 | |
| DHCP server | Built-in DHCP server to distribute IP address to CPE by CM’s Ethernet port | |
| DCHP client | CM automatically gets IP and DNS server address from MSO DHCP server | |
|
Mechanical |
||
| Dimensions (TBD) | 133mm x 99mm x 20mm (Including Heatsink) | |
| WPS Button | WPS Button | |
|
Environmental |
||
| Power Input | 12V/1A | |
| Power Consumption | 12W (Max.) | |
| Operating Temperature | 0 to 40 oC | |
| Operating Humidity | 10~90% (Non Condensing) | |
| Storage Temperature | -40 to 85 oC | |
Interface Pin Definition and Mechanical Characteristic
F Connector:
RF Loop Throughput: SMB, 75 OHM, Straight Angle, DIP
RJ45, w/Shielding, w/LED, w/o Transformer, Yellow, Right Angle, DIP
Signal Interface 1: Pin Header, 2×18, 2.0mm, K31, K32, Straight Angle, SMD
|
Table #1: Signal Interface 1 |
|||
|
Pin1 |
RX1+ |
Pin19 |
GROUND |
|
Pin2 |
RX1- |
Pin20 |
USB_DP |
|
Pin3 |
TX1+ |
Pin21 |
NC |
|
Pin4 |
TX1- |
Pin22 |
NC |
|
Pin5 |
RX2+ |
Pin23 |
NC |
|
Pin6 |
RX2- |
Pin24 |
NC |
|
Pin7 |
TX2+ |
Pin25 |
NC |
|
Pin8 |
TX2- |
Pin26 |
NC |
|
Pin9 |
NC |
Pin27 |
NC |
|
Pin10 |
NC |
Pin28 |
NC |
|
Pin11 |
NC |
Pin29 |
NC |
|
Pin12 |
NC |
Pin30 |
NC |
|
Pin13 |
NC |
Pin31 |
K |
|
Pin14 |
GROUND |
Pin32 |
K |
|
Pin15 |
GROUND |
Pin33 |
+12V |
|
Pin16 |
USB_DM |
Pin34 |
+12V |
|
Pin17 |
GROUND |
Pin35 |
GND |
|
Pin18 |
USB_DM |
Pin36 |
GND |
Note: NC-No Connect; K-No Pin
Signal Interface 2: Wafer Header, 1×6, 2.54mm, w/Latch, Straight Angle, DIP
| Table #2: Signal Interface 2 | |
|
Pin1 |
GROUND |
|
Pin2 |
WIFI_LED_N |
|
Pin3 |
DOCSIS_DS_LED_N |
|
Pin4 |
DOCSIS_US_LED_N |
|
Pin5 |
DOCSIS_ONLINE_LED_N |
|
Pin6 |
CM_ACTIVITY_LED_N |
Reset Button: TACT Switch, 4P, Right Angle, DIP
Press and hold this Reset Button for about 1 ~ 3 seconds, this will enable WiFi WPS function.
Press and hold this Reset Button for at least 10 seconds, then Reset WiFi to Factory Default Settings.
PCBA, Mechanical Characteristic
TOP
BOTTOM
Product detail pictures:
Related Product Guide:
Our enterprise since its inception, constantly regards product good quality as organization life, constantly improve production technology, strengthen merchandise high quality and continuously strengthen enterprise total good quality administration, in strict accordance with all the national standard ISO 9001:2000 for China Wholesale Best Cable Modem With Voice – ECMM, Wireless Gateway, DOCSIS 3.0, 3xFE, SMB Loop Through, HS132E – MoreLink, The product will supply to all over the world, such as: Qatar, Lahore, Monaco, Make sure you genuinely feel free to send us your requirements and we are going to respond for you asap. We now have got a skilled engineering group to serve for your just about every detailed needs. Cost-free samples could be sent to suit your needs personally to understand much more information. In an effort to meet your requires, be sure to seriously feel free to make contact with us. You may send us emails and contact us directly. Moreover, we welcome visits to our factory from around the globe for much better recognizing of our organization. nd objects. In our trade with merchants of numerous countries, we usually adhere for the principle of equality and mutual benefit. It is really our hope to market, by joint efforts, each trade and friendship to our mutual advantage. We look forward to getting your inquiries.
By Madge from Jersey - 2018.05.15 10:52
In China, we have purchased many times, this time is the most successful and most satisfactory, a sincere and realiable Chinese manufacturer!
By jari dedenroth from Sri Lanka - 2018.12.25 12:43
