China Wholesale China Smart Home Products Factories – Wi-Fi AP/STA module,fast roaming for industrial automation, SW221E – MoreLink

China Wholesale China Smart Home Products Factories –  Wi-Fi AP/STA module,fast roaming for industrial automation, SW221E – MoreLink

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

"Sincerity, Innovation, Rigorousness, and Efficiency" could be the persistent conception of our enterprise to the long-term to produce together with clients for mutual reciprocity and mutual profit for Cpe 5g, Tssi, Arris, We welcome new and previous customers from all walks of lifestyle to contact us for long run organization relationships and mutual achievements.
China Wholesale China Smart Home Products Factories – Wi-Fi AP/STA module,fast roaming for industrial automation, SW221E – MoreLink Detail:

The system block as below:

 

1

Features

♦ WiFi Solution: QCA6174A
♦ MT7620A, embedded MIPS24KEc (580 MHz) with 64 KB I-Cache and 32 KB D-Cache; 1x PCIe, 2x RGMII
♦ QCA6174A, 802.11 a/b/g/n/ac WiFi 2T2R Single Chip, provides the highest PHY rate up to 867 Mbps
♦ WiFi 2.4G and 5G are switchable (Change mode will be taken an effect after rebooting)
♦ WiFi Mode: it can be configured as STA (Default) and AP mode by SW

♦ Support Windows version: Windows XP, Explorer6 and above version of it
♦ Setting value can be backup/restore into/from file which is editable before restore to device
♦ Factory default settings are 5G 11n and STA mode
♦ Support Setup-wizard

♦ Support FW remote upgrade
♦ Memory: DDR2 64MB, SPI Flash 8MB

♦ GPHY: REALTEK RTL8211E, 10/100/1000M Ethernet Transceiver
♦ LAN: Gigabit Ethernet interface (RJ45) x1
♦ Chip Antenna: x2, On-board, SMD Type; Peak Gain: 3dBi (2.4GHz)/3.3dBi (5GHz), Dual band
♦ Power Input Range: 5 to 24 VDC
♦ Super Small Package

Technical Parameters

Connectivity I/O Port
1. RJ45 LAN Port10/100/1000 Base-T(X)RJ45, w/shielding, w/o transformer, w/o LEDs, Right Angle, DIP
2. Power Connector Connected to Power Adapter (Voltage 24V); PA Pin Header, 1×2, 2.0mm, Right Angle, DIP
3. DC JACK Connected to USB interface cable;DC Jack, DC 30V/0.5A, ID=1.6mm, OD=4.5mm, Right Angle, DIP
4. INIT Connector Pin definition and function, please refer to the followingWafer Header, 1×2, 1.5mm, Straight Angle, DIP
5. DIP Switch Pin definition and function, please refer to the followingDIP Switch, 2-Position, Red, Right Angle, DIP
6. SMD LED 0603 WLAN LED: GreenLAN LED: Orange for GE (Giga Ethernet); Green for FE (Fast Ethernet)PWR LED: GreenDHCP Error LED: Red
Wireless (2.4G, 5G switchable)
Standard 802.11 b/g/n, 2T2R802.11 a/n/ac, 2T2R
Freq. Mode Switchable (Change mode will be taken an effect after rebooting)
Channel KR standard, it should support CN, US WiFi channel by FW update later
Antenna Chip-antenna x 2 MIMO
Roaming 10ms fast roaming (only support between same frequency)
Mode STA, AP switchableDefault is STA mode
WiFi 2.4G
Channel, 13Ch. Ch. 1~13, 2402~2482MHz
Standard 802.11 b/g/n
Performance 2T2R, PHY rate up to 300 Mbps
TX Power >15dBm @HT20 MCS7 @ Antenna Port
RX sensitivity -68dBm@20MHz, MCS7; -66dBm@40MHz, MCS7
Security WEP WPA WPA2
WiFi 5G
Channel, 19Ch. Ch. 36,40,44,48                  5170~5250MHzCh. 52,56,60,64                  5250~5330MHzCh. 100,104,108,112,116,120,124  5490~5630MHzCh. 149,153,157,161              5735~5815MHz
Standard 802.11 a/n/ac
Performance 2T2R, PHY rate up to 867 Mbps
TX Power >14dBm @HT80 MCS9 @ Antenna Port
RX sensitivity -74dBm@20MHz, MCS7; -71dBm@40MHz, MCS7; -61dBm@80MHz, MCS9
Security WEP WPA WPA2
Mechanical
Dimensions  89.2mm (W) x 60mm (L) x 21mm (H)
Weight TBD
Environmental
Power Input 24V/0.25A
Power Consumption 6W (Max.)
Operating Temperature 0 to 40 °C
Operating Humidity 10~90% (Non Condensing)
Storage Temperature -40 to 85 °C
MTBF TBD, which is based on the materials used by design and DUT, operates condition.

About the WiFi Speed

The link speed shown for the transmission rate in this produce specification, and elsewhere is the theoretical maximum value based on the wireless LAN standard and does not represent the actual data transfer rate.


Product detail pictures:

China Wholesale China Smart Home Products Factories –  Wi-Fi AP/STA module,fast roaming for industrial automation, SW221E – MoreLink detail pictures


Related Product Guide:

Our corporation puts emphasis about the administration, the introduction of talented staff, plus the construction of team building, attempting hard to improve the quality and liability consciousness of team members. Our organization successfully attained IS9001 Certification and European CE Certification of China Wholesale China Smart Home Products Factories – Wi-Fi AP/STA module,fast roaming for industrial automation, SW221E – MoreLink, The product will supply to all over the world, such as: Hamburg, Auckland, Swansea, Customer satisfaction is our goal. We are looking forward to cooperating with you and providing our best services for you. We warmly welcome you to contact us and please feel free to contact us. Browse our online showroom to see what we can do for you. And then E-mail us your specifications or inquiries today.
  • The factory workers have a good team spirit, so we received high quality products fast, in addition, the price is also appropriate, this is a very good and reliable Chinese manufacturers.
    5 Stars By Kim from Morocco - 2017.03.08 14:45
    Cooperate with you every time is very successful, very happy. Hope that we can have more cooperation!
    5 Stars By Edwina from Salt Lake City - 2017.05.21 12:31

    Related Products