China Wholesale Iot Smart Home Quotes – Wi-Fi AP/STA module,fast roaming for industrial automation, SW221E – MoreLink
Short Description:
Product Detail
Product Tags
Related Video
Feedback (2)
China Wholesale Iot Smart Home Quotes – Wi-Fi AP/STA module,fast roaming for industrial automation, SW221E – MoreLink Detail:
The system block as below:
Features
♦ WiFi Solution: QCA6174A
♦ MT7620A, embedded MIPS24KEc (580 MHz) with 64 KB I-Cache and 32 KB D-Cache; 1x PCIe, 2x RGMII
♦ QCA6174A, 802.11 a/b/g/n/ac WiFi 2T2R Single Chip, provides the highest PHY rate up to 867 Mbps
♦ WiFi 2.4G and 5G are switchable (Change mode will be taken an effect after rebooting)
♦ WiFi Mode: it can be configured as STA (Default) and AP mode by SW
♦ Support Windows version: Windows XP, Explorer6 and above version of it
♦ Setting value can be backup/restore into/from file which is editable before restore to device
♦ Factory default settings are 5G 11n and STA mode
♦ Support Setup-wizard
♦ Support FW remote upgrade
♦ Memory: DDR2 64MB, SPI Flash 8MB
♦ GPHY: REALTEK RTL8211E, 10/100/1000M Ethernet Transceiver
♦ LAN: Gigabit Ethernet interface (RJ45) x1
♦ Chip Antenna: x2, On-board, SMD Type; Peak Gain: 3dBi (2.4GHz)/3.3dBi (5GHz), Dual band
♦ Power Input Range: 5 to 24 VDC
♦ Super Small Package
Technical Parameters
| Connectivity I/O Port | |
| 1. RJ45 | LAN Port10/100/1000 Base-T(X)RJ45, w/shielding, w/o transformer, w/o LEDs, Right Angle, DIP |
| 2. Power Connector | Connected to Power Adapter (Voltage 24V); PA Pin Header, 1×2, 2.0mm, Right Angle, DIP |
| 3. DC JACK | Connected to USB interface cable;DC Jack, DC 30V/0.5A, ID=1.6mm, OD=4.5mm, Right Angle, DIP |
| 4. INIT Connector | Pin definition and function, please refer to the followingWafer Header, 1×2, 1.5mm, Straight Angle, DIP |
| 5. DIP Switch | Pin definition and function, please refer to the followingDIP Switch, 2-Position, Red, Right Angle, DIP |
| 6. SMD LED 0603 | WLAN LED: GreenLAN LED: Orange for GE (Giga Ethernet); Green for FE (Fast Ethernet)PWR LED: GreenDHCP Error LED: Red |
| Wireless (2.4G, 5G switchable) | |
| Standard | 802.11 b/g/n, 2T2R802.11 a/n/ac, 2T2R |
| Freq. Mode | Switchable (Change mode will be taken an effect after rebooting) |
| Channel | KR standard, it should support CN, US WiFi channel by FW update later |
| Antenna | Chip-antenna x 2 MIMO |
| Roaming | 10ms fast roaming (only support between same frequency) |
| Mode | STA, AP switchableDefault is STA mode |
| WiFi 2.4G | |
| Channel, 13Ch. | Ch. 1~13, 2402~2482MHz |
| Standard | 802.11 b/g/n |
| Performance | 2T2R, PHY rate up to 300 Mbps |
| TX Power | >15dBm @HT20 MCS7 @ Antenna Port |
| RX sensitivity | -68dBm@20MHz, MCS7; -66dBm@40MHz, MCS7 |
| Security | WEP WPA WPA2 |
| WiFi 5G | |
| Channel, 19Ch. | Ch. 36,40,44,48 5170~5250MHzCh. 52,56,60,64 5250~5330MHzCh. 100,104,108,112,116,120,124 5490~5630MHzCh. 149,153,157,161 5735~5815MHz |
| Standard | 802.11 a/n/ac |
| Performance | 2T2R, PHY rate up to 867 Mbps |
| TX Power | >14dBm @HT80 MCS9 @ Antenna Port |
| RX sensitivity | -74dBm@20MHz, MCS7; -71dBm@40MHz, MCS7; -61dBm@80MHz, MCS9 |
| Security | WEP WPA WPA2 |
| Mechanical | |
| Dimensions | 89.2mm (W) x 60mm (L) x 21mm (H) |
| Weight | TBD |
| Environmental | |
| Power Input | 24V/0.25A |
| Power Consumption | 6W (Max.) |
| Operating Temperature | 0 to 40 °C |
| Operating Humidity | 10~90% (Non Condensing) |
| Storage Temperature | -40 to 85 °C |
| MTBF | TBD, which is based on the materials used by design and DUT, operates condition. |
About the WiFi Speed
The link speed shown for the transmission rate in this produce specification, and elsewhere is the theoretical maximum value based on the wireless LAN standard and does not represent the actual data transfer rate.
Product detail pictures:
Related Product Guide:
Our merchandise are commonly recognized and reliable by customers and can meet constantly developing economic and social desires for China Wholesale Iot Smart Home Quotes – Wi-Fi AP/STA module,fast roaming for industrial automation, SW221E – MoreLink, The product will supply to all over the world, such as: Yemen, Plymouth, Plymouth, Qualified R&D engineer will be there for your consultation service and we will try our best to meet your requirements. So please feel free to contact us for inquiries. You'll be able to send us emails or call us for small business. Also you are able to come to our business by yourself to get further knowing of us. And we will surely give you the best quotation and after-sale service. We're ready to build stable and friendly relations with our merchants. To achieve mutual success, we will make our best efforts to build a solid co-operation and transparent communication work with our companions. Above all, we are here to welcome your inquiries for any of our goods and service.
By Fay from Senegal - 2018.12.05 13:53
We have been appreciated the Chinese manufacturing, this time also did not let us disappoint,good job!
By Ella from Amsterdam - 2018.06.18 17:25
