China Wholesale Smart Home Manufacturers Factory – Wi-Fi AP/STA module,fast roaming for industrial automation, SW221E – MoreLink

Short Description:

Product Detail

Product Tags

Feedback (2)

We keep on with the basic principle of "quality to start with, support very first, continuous improvement and innovation to meet the customers" for your management and "zero defect, zero complaints" as the quality objective. To great our service, we offer the items with all the superior top quality at the reasonable selling price for Cmc, Embedded Cable Modem Module, Cablelabs, We sincerely do our greatest to supply the very best support for every one of the purchasers and businessmen.

China Wholesale Smart Home Manufacturers Factory – Wi-Fi AP/STA module,fast roaming for industrial automation, SW221E – MoreLink Detail:

The system block as below:

Features

♦ WiFi Solution: QCA6174A
♦ MT7620A, embedded MIPS24KEc (580 MHz) with 64 KB I-Cache and 32 KB D-Cache; 1x PCIe, 2x RGMII
♦ QCA6174A, 802.11 a/b/g/n/ac WiFi 2T2R Single Chip, provides the highest PHY rate up to 867 Mbps
♦ WiFi 2.4G and 5G are switchable (Change mode will be taken an effect after rebooting)
♦ WiFi Mode: it can be configured as STA (Default) and AP mode by SW
♦ Support Windows version: Windows XP, Explorer6 and above version of it
♦ Setting value can be backup/restore into/from file which is editable before restore to device
♦ Factory default settings are 5G 11n and STA mode
♦ Support Setup-wizard
♦ Support FW remote upgrade
♦ Memory: DDR2 64MB, SPI Flash 8MB
♦ GPHY: REALTEK RTL8211E, 10/100/1000M Ethernet Transceiver
♦ LAN: Gigabit Ethernet interface (RJ45) x1
♦ Chip Antenna: x2, On-board, SMD Type; Peak Gain: 3dBi (2.4GHz)/3.3dBi (5GHz), Dual band
♦ Power Input Range: 5 to 24 VDC
♦ Super Small Package

Technical Parameters

Connectivity I/O Port
1. RJ45	LAN Port10/100/1000 Base-T(X)RJ45, w/shielding, w/o transformer, w/o LEDs, Right Angle, DIP
2. Power Connector	Connected to Power Adapter (Voltage 24V); PA Pin Header, 1×2, 2.0mm, Right Angle, DIP
3. DC JACK	Connected to USB interface cable;DC Jack, DC 30V/0.5A, ID=1.6mm, OD=4.5mm, Right Angle, DIP
4. INIT Connector	Pin definition and function, please refer to the followingWafer Header, 1×2, 1.5mm, Straight Angle, DIP
5. DIP Switch	Pin definition and function, please refer to the followingDIP Switch, 2-Position, Red, Right Angle, DIP
6. SMD LED 0603	WLAN LED: GreenLAN LED: Orange for GE (Giga Ethernet); Green for FE (Fast Ethernet)PWR LED: GreenDHCP Error LED: Red
Wireless (2.4G, 5G switchable)
Standard	802.11 b/g/n, 2T2R802.11 a/n/ac, 2T2R
Freq. Mode	Switchable (Change mode will be taken an effect after rebooting)
Channel	KR standard, it should support CN, US WiFi channel by FW update later
Antenna	Chip-antenna x 2 MIMO
Roaming	10ms fast roaming (only support between same frequency)
Mode	STA, AP switchableDefault is STA mode
WiFi 2.4G
Channel, 13Ch.	Ch. 1~13, 2402~2482MHz
Standard	802.11 b/g/n
Performance	2T2R, PHY rate up to 300 Mbps
TX Power	>15dBm @HT20 MCS7 @ Antenna Port
RX sensitivity	-68dBm@20MHz, MCS7; -66dBm@40MHz, MCS7
Security	WEP WPA WPA2
WiFi 5G
Channel, 19Ch.	Ch. 36,40,44,48 5170~5250MHzCh. 52,56,60,64 5250~5330MHzCh. 100,104,108,112,116,120,124 5490~5630MHzCh. 149,153,157,161 5735~5815MHz
Standard	802.11 a/n/ac
Performance	2T2R, PHY rate up to 867 Mbps
TX Power	>14dBm @HT80 MCS9 @ Antenna Port
RX sensitivity	-74dBm@20MHz, MCS7; -71dBm@40MHz, MCS7; -61dBm@80MHz, MCS9
Security	WEP WPA WPA2
Mechanical
Dimensions	89.2mm (W) x 60mm (L) x 21mm (H)
Weight	TBD
Environmental
Power Input	24V/0.25A
Power Consumption	6W (Max.)
Operating Temperature	0 to 40 °C
Operating Humidity	10~90% (Non Condensing)
Storage Temperature	-40 to 85 °C
MTBF	TBD, which is based on the materials used by design and DUT, operates condition.

About the WiFi Speed

The link speed shown for the transmission rate in this produce specification, and elsewhere is the theoretical maximum value based on the wireless LAN standard and does not represent the actual data transfer rate.

Product detail pictures:

Related Product Guide:

High quality Very first,and Shopper Supreme is our guideline to offer the most beneficial company to our clients.Nowadays, we're hoping our best to be certainly one of the top exporters in our area to satisfy consumers additional will need for China Wholesale Smart Home Manufacturers Factory – Wi-Fi AP/STA module,fast roaming for industrial automation, SW221E – MoreLink, The product will supply to all over the world, such as: Guatemala, Hungary, Rotterdam, All our staffs believe that: Quality builds today and service creates future. We know that good quality and the best service are the only way for us to achieve our customers and to achieve ourselves too. We welcome customers all over the word to contact us for future business relationships. Our products are the best. Once Selected, Perfect Forever!

Iot Home Gateway

List Of Smart Home Products

Smart Home Control App

Smart Home Temperature

This company has a lot of ready-made options to choose and also could custom new program according to our demand, which is very nice to meet our needs.