China Wholesale Zigbee Contact Sensor Manufacturers – Wi-Fi AP/STA module,fast roaming for industrial automation, SW221E – MoreLink
Short Description:
Product Detail
Product Tags
Related Video
Feedback (2)
China Wholesale Zigbee Contact Sensor Manufacturers – Wi-Fi AP/STA module,fast roaming for industrial automation, SW221E – MoreLink Detail:
The system block as below:
Features
♦ WiFi Solution: QCA6174A
♦ MT7620A, embedded MIPS24KEc (580 MHz) with 64 KB I-Cache and 32 KB D-Cache; 1x PCIe, 2x RGMII
♦ QCA6174A, 802.11 a/b/g/n/ac WiFi 2T2R Single Chip, provides the highest PHY rate up to 867 Mbps
♦ WiFi 2.4G and 5G are switchable (Change mode will be taken an effect after rebooting)
♦ WiFi Mode: it can be configured as STA (Default) and AP mode by SW
♦ Support Windows version: Windows XP, Explorer6 and above version of it
♦ Setting value can be backup/restore into/from file which is editable before restore to device
♦ Factory default settings are 5G 11n and STA mode
♦ Support Setup-wizard
♦ Support FW remote upgrade
♦ Memory: DDR2 64MB, SPI Flash 8MB
♦ GPHY: REALTEK RTL8211E, 10/100/1000M Ethernet Transceiver
♦ LAN: Gigabit Ethernet interface (RJ45) x1
♦ Chip Antenna: x2, On-board, SMD Type; Peak Gain: 3dBi (2.4GHz)/3.3dBi (5GHz), Dual band
♦ Power Input Range: 5 to 24 VDC
♦ Super Small Package
Technical Parameters
| Connectivity I/O Port | |
| 1. RJ45 | LAN Port10/100/1000 Base-T(X)RJ45, w/shielding, w/o transformer, w/o LEDs, Right Angle, DIP |
| 2. Power Connector | Connected to Power Adapter (Voltage 24V); PA Pin Header, 1×2, 2.0mm, Right Angle, DIP |
| 3. DC JACK | Connected to USB interface cable;DC Jack, DC 30V/0.5A, ID=1.6mm, OD=4.5mm, Right Angle, DIP |
| 4. INIT Connector | Pin definition and function, please refer to the followingWafer Header, 1×2, 1.5mm, Straight Angle, DIP |
| 5. DIP Switch | Pin definition and function, please refer to the followingDIP Switch, 2-Position, Red, Right Angle, DIP |
| 6. SMD LED 0603 | WLAN LED: GreenLAN LED: Orange for GE (Giga Ethernet); Green for FE (Fast Ethernet)PWR LED: GreenDHCP Error LED: Red |
| Wireless (2.4G, 5G switchable) | |
| Standard | 802.11 b/g/n, 2T2R802.11 a/n/ac, 2T2R |
| Freq. Mode | Switchable (Change mode will be taken an effect after rebooting) |
| Channel | KR standard, it should support CN, US WiFi channel by FW update later |
| Antenna | Chip-antenna x 2 MIMO |
| Roaming | 10ms fast roaming (only support between same frequency) |
| Mode | STA, AP switchableDefault is STA mode |
| WiFi 2.4G | |
| Channel, 13Ch. | Ch. 1~13, 2402~2482MHz |
| Standard | 802.11 b/g/n |
| Performance | 2T2R, PHY rate up to 300 Mbps |
| TX Power | >15dBm @HT20 MCS7 @ Antenna Port |
| RX sensitivity | -68dBm@20MHz, MCS7; -66dBm@40MHz, MCS7 |
| Security | WEP WPA WPA2 |
| WiFi 5G | |
| Channel, 19Ch. | Ch. 36,40,44,48 5170~5250MHzCh. 52,56,60,64 5250~5330MHzCh. 100,104,108,112,116,120,124 5490~5630MHzCh. 149,153,157,161 5735~5815MHz |
| Standard | 802.11 a/n/ac |
| Performance | 2T2R, PHY rate up to 867 Mbps |
| TX Power | >14dBm @HT80 MCS9 @ Antenna Port |
| RX sensitivity | -74dBm@20MHz, MCS7; -71dBm@40MHz, MCS7; -61dBm@80MHz, MCS9 |
| Security | WEP WPA WPA2 |
| Mechanical | |
| Dimensions | 89.2mm (W) x 60mm (L) x 21mm (H) |
| Weight | TBD |
| Environmental | |
| Power Input | 24V/0.25A |
| Power Consumption | 6W (Max.) |
| Operating Temperature | 0 to 40 °C |
| Operating Humidity | 10~90% (Non Condensing) |
| Storage Temperature | -40 to 85 °C |
| MTBF | TBD, which is based on the materials used by design and DUT, operates condition. |
About the WiFi Speed
The link speed shown for the transmission rate in this produce specification, and elsewhere is the theoretical maximum value based on the wireless LAN standard and does not represent the actual data transfer rate.
Product detail pictures:
Related Product Guide:
We emphasize progress and introduce new solutions into the market each year for China Wholesale Zigbee Contact Sensor Manufacturers – Wi-Fi AP/STA module,fast roaming for industrial automation, SW221E – MoreLink, The product will supply to all over the world, such as: Croatia, Montpellier, Slovenia, Based on our guiding principle of quality is the key to development, we continually strive to exceed our customers' expectations. As such, we sincerely invite all interested companies to contact us for future cooperation, We welcome old and new customers to hold hands together for exploring and developing; For more information, be sure to feel free to contact us. Thanks. Advanced equipment, strict quality control, customer-orientation service, initiative summary and improvement of defects and extensive industry experience enable us to guarantee more customer satisfaction and reputation which, in return, brings us more orders and benefits. If you are interested in any of our merchandise, make sure you feel free to contact us. Inquiry or visit to our company are warmly welcome. We sincerely hope to start a win-win and friendly partnership with you. You can see more details in our website.
By Edith from Madras - 2018.06.05 13:10
We always believe that the details decides the company's product quality, in this respect, the company conform our requirements and the goods are meet our expectations.
By Emma from Malaysia - 2018.11.28 16:25
