DDA Pricelist – ECMM, DOCSIS 3.0, 2xGE, DVB-C Tuner, HX120E – MoreLink
Short Description:
Product Detail
Product Tags
Related Video
Feedback (2)
DDA Pricelist – ECMM, DOCSIS 3.0, 2xGE, DVB-C Tuner, HX120E – MoreLink Detail:
Product Detail
The MoreLink’s HX120E is a DOCSIS 3.0 ECMM Module (Embedded Cable Modem Module) supporting up to 8 downstream and 4 upstream bonded channels to deliver a powerful high-speed Internet experience. Integrated 4 channels DVB-C Demodulator, which directly outputs MPEG TS digital signals to STB.
The HX120E provides you advanced multimedia services with data rates up to 400 Mbps download and 108 Mbps upload depending on your Cable Internet provider service. That makes Internet applications far more realistic, faster, and efficient than ever before.
Product Features
➢ DOCSIS / EuroDOCSIS 3.0 compliant
➢ 8 downstream x 4 upstream bonded channels
➢ Support Full Band Capture
➢ One 10/100 Mbps Ethernet for RJ45
➢ One 10/100 Mbps Ethernet Signals for STB
➢ Integrated 4 Channels DVB-C Demodulation
➢ Software upgrade by HFC network
➢ Support SNMP V1/V2/V3
➢ Support baseline privacy encryption (BPI/BPI+)
Application
➢ DVB-C or Hybrid STB embedded CM
Technical Parameters
|
DOCSIS Standard |
|
| DOCSIS 3.0 Standard Compliant, compatible with Docsis2.0/1.0/1.1 standard | |
|
Interfaces |
|
| RF | One F Connector |
| Ethernet | One Giga Ethernet port (RJ45) with LEDs |
| Signal Interface | 50Pin 0.5mm FFC Connector. The signals including: One Giga Ethernet, TS*4, I2C Bus, +12V and GND. Pin Definitions see Table #1 |
|
RF Downstream |
|
| Frequency Range | 108 ~ 1002 MHz |
| Bonded Channels | Up to 8 Channel Bonding |
| Carrier Bandwidth | 6 MHz |
| Modulation | 64QAM, 256QAM |
| Data Rate | Up to 298Mbps by 8 D/S Channel Bonding |
| RF Input Sensitivity Level | -15 dBmV to +15 dBmV |
| Return Loss | <-6 dB for 108 to 1002MHz |
| Input Impedance | 75 OHM |
|
RF Upstream |
|
| Frequency Range | 5 to 85 MHz |
| Bonded Channels | Up to 4 Channel Bonding |
| Modulation | TDMA: QPSK,8QAM,16QAM,32QAM,64QAMS-CDMA: QPSK,8QAM,16QAM,32QAM,64QAM,128QAM |
| Data Rate | Up to 108 Mbps by 4 U/S Channel Bonding |
| RF Output Level | TDMA (32/64 QAM): +17 ~ +57dBmVTDMA (8/16 QAM): +17 ~ +58dBmV TDMA (QPSK): +17 ~ +61dBmV S-CDMA: +17 ~ +56dBmV |
| TX Frequency Error | <+/-15 ppm |
| Return Loss | <= -6 dB for 5 to 85MHz |
| Input Impedance | 75 OHM |
|
TS*4 Outputs |
|
| Tuner | MxL214C, Full-Band Capture, Four Transport Stream Outputs |
| Frequency Range | 108 ~ 1002 MHz |
|
Environmental |
|
| Operating Temperature | -10 to +45 oC |
| Operating Related Humidity | 10-90% (Non Condensing) |
| Storage Temperature | -20 to +55 oC |
| Dimensions (L x W x H) | 130mm x 91.5mm x 21mm (Including Heatsink) |
|
Power Consumption |
|
| Power Consumption | < 10W (Max. System Loading) |
Table #1: Signal Interface 1
|
Pin1 |
GND |
Pin26 |
TUNER_SCL |
|
Pin2 |
TS_SYNC0 |
Pin27 |
TUNER_SDA |
|
Pin3 |
GND |
Pin28 |
TUNER_RST |
|
Pin4 |
TS_DAT0 |
Pin29 |
CM_RST |
|
Pin5 |
GND |
Pin30 |
LED_DS |
|
Pin6 |
TS_VAL0 |
Pin31 |
LED_US |
|
Pin7 |
GND |
Pin32 |
LED_ONLINE |
|
Pin8 |
TS_SYNC1 |
Pin33 |
GND |
|
Pin9 |
GND |
Pin34 |
MDI0+ |
|
Pin10 |
TS_DAT1 |
Pin35 |
MDI0- |
|
Pin11 |
GND |
Pin36 |
GND |
|
Pin12 |
TS_VAL1 |
Pin37 |
MDI1+ |
|
Pin13 |
GND |
Pin38 |
MDI1- |
|
Pin14 |
TS_SYNC2 |
Pin39 |
GND |
|
Pin15 |
GND |
Pin40 |
MDI2+ |
|
Pin16 |
TS_DAT2 |
Pin41 |
MDI2- |
|
Pin17 |
GND |
Pin42 |
GND |
|
Pin18 |
TS_VAL2 |
Pin43 |
MDI3+ |
|
Pin19 |
GND |
Pin44 |
MDI3- |
|
Pin20 |
TS_SYNC3 |
Pin45 |
GND |
|
Pin21 |
GND |
Pin46 |
GND |
|
Pin22 |
TS_DAT3 |
Pin47 |
GND |
|
Pin23 |
GND |
Pin48 |
12V |
|
Pin24 |
TS_VAL3 |
Pin49 |
12V |
|
Pin25 |
GND |
Pin50 |
12V |
Product detail pictures:
Related Product Guide:
"Quality very first, Honesty as base, Sincere assistance and mutual profit" is our idea, in an effort to create consistently and pursue the excellence for DDA Pricelist – ECMM, DOCSIS 3.0, 2xGE, DVB-C Tuner, HX120E – MoreLink, The product will supply to all over the world, such as: Germany, Vietnam, Namibia, The quality of our merchandise is equal to OEM's quality, because our core parts are the same with OEM supplier. The above items have passed professional certification, and we not only can produce OEM-standard items but we also accept Customized Merchandise order.
By Candance from Montpellier - 2018.06.18 17:25
The factory workers have rich industry knowledge and operational experience, we learned a lot in working with them,we are extremely grateful that we can encount a good company has excellent wokers.
By Penelope from Manchester - 2018.05.22 12:13
