Handheld QAM Analyzer with APP, Power Level and MER for both DVB-C and DOCSIS, MKQ012

Handheld QAM Analyzer with APP, Power Level and MER for both DVB-C and DOCSIS, MKQ012

Short Description:

The MoreLink’s MKQ012 is a portable QAM Analyzer, equipped with the abilities to measure and analyze QAM parameters of DVB-C/DOCSIS networks.


Product Detail

Product Tags

Product Detail

The MoreLink’s MKQ012 is a portable QAM Analyzer, equipped with the abilities to measure and analyze QAM parameters of DVB-C/DOCSIS networks.

MKQ012 is a portable QAM Analyzer, equipped with the abilities to measure and analyze QAM parameters of DVB-C/DOCSIS networks. MKQ012 offers real-time measurement of broadcast and network services to any service providers. It can be used during new installations or maintenance and repair work on components of DVB-C/DOCSIS networks. Embedded Wi-Fi function, which enables user to get measurement data and interactive operation by APP.

Product Features

➢ Easy to operate and configure by APP

➢ Fast Channel Scan

➢ Provide useful Constellation

➢ Embedded powerful Spectrum Analyzer

➢ Measurement result showed on your smart phone through Wi-Fi

Characteristics

➢ Support DVB-C and DOCSIS QAM measurement and analysis

➢ ITU-J83 Annexes A, B, C support

➢ Auto distinguish RF Signal Type: DOCSIS or DVB-C

➢ User defined alert parameter and threshold, support two profiles: plan A / plan B

➢ Accurate measurements, +/-1dB for Power; +/-1.5dB for MER

➢ TCP / UCP / DHCP / HTTP / SNMP support

➢ Support one 10/100/1000 Mbps Ethernet Port

➢ Embedded Battery

QAM Analysis Parameters

➢ 64 QAM / 256 QAM / 4096 QAM (Option) / OFDM (Option)

➢ RF Power Level: -15 to + 50 dBmV

➢ Wide Input Tilt Range: -15dB to +15dB

➢ MER: 20 to 50 dB

➢ Pre-BER and RS correctable count

➢ Post-BER and RS uncorrectable count

➢ Constellation

➢ Tilt Measurement

Applications

➢ Digital Cable network measurements for DVB-C / DOCSIS

➢ Multi-channel monitoring

➢ Real-time QAM Analysis

➢ Installation and Maintenance for HFC network

Technical Parameters

Interfaces

RF

Female F Connector (SCTE-02)

75 Ω

RJ45 (1x RJ45 Ethernet port)

10/100/1000

Mbps

DC Jack

12V/2A DC

APP Functions

Test User defined channels test
Tools Channel Information Single Channel Measurement: lock status/power level/MER/Pre-BER/Post-BER/QAM mode/Annex mode/symbol rate and channel spectrum.
Channel Scan Scan defined channels one by one, show frequency/lock status/signal type/Power Level/MER/Post-BER
Constellation Provide selected channel’s Constellation, and power level/MER/Pre-BER/Post-BER
Spectrum Support Start/Stop/Center Frequency/Span setting, and show total power level.
Support up to 3 monitor channel setting. Provide more channel information for Monitored channel.

RF Characteristics

Frequency Range (Edge-to-Edge) 88 – 1002
88 – 1218 (Option)

MHz

Channel Bandwidth (Auto Detection) 6/8

MHz

Modulation 16/32/64/128/256
4096 (Option) / OFDM (Option)

QAM

RF Input Power Level Range (Sensitivity) -15 to + 50

dBmV

Symbol Rate  5.056941 (QAM64)
5.360537 (QAM256)
6.952 (64-QAM and 256-QAM)
6.900, 6.875, 5.200

Msym/s

Input Impedance 75

OHM

Input Return Loss > 6

dB

Minimum Noise Level -55

dBmV

Channel Power Level Accuracy +/-1

dB

MER 20 to 50 (+/-1.5)

dB

BER Pre- RS BER and Post- RS BER

Spectrum Analyzer

Basic Spectrum Analyzer Settings Preset / Hold / Run

Frequency

Span (Minimum: 6 MHz)

RBW (Minimum: 3.7 KHz)

Amplitude Offset

Amplitude Unit (dBm, dBmV, dBuV)

Measurement Marker

Average

Peak Hold

Constellation

Channel Power

Channel Demod Pre-BER / Post-BER

FEC Lock / QAM Mode / Annex

Power Level / SNR / Symbol Rate

Number of Sample (Maximum) per Span 2048
Scan Speed @ Sample number = 2048 1 (TPY.)

Second

Obtain Data
Realtime Data By API Telnet (CLI) / Web Socket / MIB

Software Features

Protocols TCP / UCP / DHCP / HTTP / SNMP
Channel Table > 80 RF Channels
Scan Time for the entire channel table Within 5 minutes for a typical table with 80 RF channels.
Supported Channel type DVB-C and DOCSIS
Monitored Parameters RF Level, QAM Constellation, MER, FEC, BER, Spectrum Analyzer
WEB UI Easy to show the scan results in a web browser.Easy to change monitored channels in table.
Spectrum for HFC plant.
Constellation for specific frequency.
MIB Private MIBs. Facilitate access to monitoring data for network management systems
Alarm Thresholds Signal Leve/ MER / BER can be set via WEB UI or MIB or APP, and alarm messages can be sent via SNMP TRAP or displayed on the webpage
LOG Can store at least 3 days of monitoring logs and alarm logs with 15min scanning interval for 80 Channels configuration.
Customization Open protocol and can be easily integrated with OSS
Firmware Upgrade Support remote or local firmware upgrade

Physical

Dimensions 180mm (W) x 92mm (D) x 55mm (H) (Including F connector)
Weight 650+/-10g
Power Supply Power Adapter: Input 100-240 VAC 50-60Hz; Output 12V/2A DC
Battery Power Backup: Li-ion 5600mAH
Power Consumption < 12W
Power Button x1
LED PWR LED – Green
DS LED – Green
US LED – Green
Online LED – Green
Wi-Fi LED - Green

Environment

Operating Temperature 0 to 40 oC
Operating Humidity 10 to 90 % (Non-Condensing)

WEB GUI Screenshots

Monitoring Parameters (Plan B)

1 (5)

Full Spectrum and Channel Parameters

(Lock Status; QAM Mode; Channel Power; SNR; MER; post BER; Symbol Rate; Spectrum Inverted)

1 (6)
1 (7)

Constellation

1 (8)

APP Screenshots

1 (9)

Channel Test

1 (10)

TOOLS

1 (12)

Channel Information

1 (13)

Constellation

1 (11)

Spectrum

1 (14)

Channel Scan


  • Previous:
  • Next:

  • Related Products