OEM Factory for Modem Ethernet - ECMM, DOCSIS 3.0, 2xGE, DVB-C Tuner, HX120E – MoreLink
Short Description:
Product Detail
Product Tags
Related Video
Feedback (2)
OEM Factory for Modem Ethernet - ECMM, DOCSIS 3.0, 2xGE, DVB-C Tuner, HX120E – MoreLink Detail:
Product Detail
The MoreLink’s HX120E is a DOCSIS 3.0 ECMM Module (Embedded Cable Modem Module) supporting up to 8 downstream and 4 upstream bonded channels to deliver a powerful high-speed Internet experience. Integrated 4 channels DVB-C Demodulator, which directly outputs MPEG TS digital signals to STB.
The HX120E provides you advanced multimedia services with data rates up to 400 Mbps download and 108 Mbps upload depending on your Cable Internet provider service. That makes Internet applications far more realistic, faster, and efficient than ever before.
Product Features
➢ DOCSIS / EuroDOCSIS 3.0 compliant
➢ 8 downstream x 4 upstream bonded channels
➢ Support Full Band Capture
➢ One 10/100 Mbps Ethernet for RJ45
➢ One 10/100 Mbps Ethernet Signals for STB
➢ Integrated 4 Channels DVB-C Demodulation
➢ Software upgrade by HFC network
➢ Support SNMP V1/V2/V3
➢ Support baseline privacy encryption (BPI/BPI+)
Application
➢ DVB-C or Hybrid STB embedded CM
Technical Parameters
DOCSIS Standard |
|
DOCSIS 3.0 Standard Compliant, compatible with Docsis2.0/1.0/1.1 standard | |
CPU |
|
CPU | BCM33838M, FBGA-596 |
MEMORY | 64MB DDR2 |
Flash | 8MB SPI Flash |
Interfaces |
|
RF | One F Connector |
Ethernet | One Giga Ethernet port (RJ45) with LEDs |
Signal Interface | 50Pin 0.5mm FFC Connector. The signals including: One Giga Ethernet, TS*4, I2C Bus, +12V and GND. Pin Definitions see Table #1 |
RF Downstream |
|
Frequency Range | 108 ~ 1002 MHz |
Bonded Channels | Up to 8 Channel Bonding |
Carrier Bandwidth | 6 MHz |
Modulation | 64QAM, 256QAM |
Data Rate | Up to 298Mbps by 8 D/S Channel Bonding |
RF Input Sensitivity Level | -15 dBmV to +15 dBmV |
Return Loss | <-6 dB for 108 to 1002MHz |
Input Impedance | 75 OHM |
RF Upstream |
|
Frequency Range | 5 to 85 MHz |
Bonded Channels | Up to 4 Channel Bonding |
Modulation | TDMA: QPSK,8QAM,16QAM,32QAM,64QAMS-CDMA: QPSK,8QAM,16QAM,32QAM,64QAM,128QAM |
Data Rate | Up to 108 Mbps by 4 U/S Channel Bonding |
RF Output Level |
TDMA (32/64 QAM): +17 ~ +57dBmVTDMA (8/16 QAM): +17 ~ +58dBmV TDMA (QPSK): +17 ~ +61dBmV S-CDMA: +17 ~ +56dBmV |
TX Frequency Error | <+/-15 ppm |
Return Loss | <= -6 dB for 5 to 85MHz |
Input Impedance | 75 OHM |
TS*4 Outputs |
|
Tuner | MxL214C, Full-Band Capture, Four Transport Stream Outputs |
Frequency Range | 108 ~ 1002 MHz |
Environmental |
|
Operating Temperature | -10 to +45 oC |
Operating Related Humidity | 10-90% (Non Condensing) |
Storage Temperature | -20 to +55 oC |
Dimensions (L x W x H) | 130mm x 91.5mm x 21mm (Including Heatsink) |
Power Consumption |
|
Power Consumption | < 10W (Max. System Loading) |
Table #1: Signal Interface 1
Pin1 |
GND |
Pin26 |
TUNER_SCL |
Pin2 |
TS_SYNC0 |
Pin27 |
TUNER_SDA |
Pin3 |
GND |
Pin28 |
TUNER_RST |
Pin4 |
TS_DAT0 |
Pin29 |
CM_RST |
Pin5 |
GND |
Pin30 |
LED_DS |
Pin6 |
TS_VAL0 |
Pin31 |
LED_US |
Pin7 |
GND |
Pin32 |
LED_ONLINE |
Pin8 |
TS_SYNC1 |
Pin33 |
GND |
Pin9 |
GND |
Pin34 |
MDI0+ |
Pin10 |
TS_DAT1 |
Pin35 |
MDI0- |
Pin11 |
GND |
Pin36 |
GND |
Pin12 |
TS_VAL1 |
Pin37 |
MDI1+ |
Pin13 |
GND |
Pin38 |
MDI1- |
Pin14 |
TS_SYNC2 |
Pin39 |
GND |
Pin15 |
GND |
Pin40 |
MDI2+ |
Pin16 |
TS_DAT2 |
Pin41 |
MDI2- |
Pin17 |
GND |
Pin42 |
GND |
Pin18 |
TS_VAL2 |
Pin43 |
MDI3+ |
Pin19 |
GND |
Pin44 |
MDI3- |
Pin20 |
TS_SYNC3 |
Pin45 |
GND |
Pin21 |
GND |
Pin46 |
GND |
Pin22 |
TS_DAT3 |
Pin47 |
GND |
Pin23 |
GND |
Pin48 |
12V |
Pin24 |
TS_VAL3 |
Pin49 |
12V |
Pin25 |
GND |
Pin50 |
12V |
Product detail pictures:


Related Product Guide:
The key to our success is "Good Product Quality, Reasonable Value and Efficient Service" for OEM Factory for Modem Ethernet - ECMM, DOCSIS 3.0, 2xGE, DVB-C Tuner, HX120E – MoreLink, The product will supply to all over the world, such as: Romania, Guatemala, Las Vegas, Our expert engineering team will generally be prepared to serve you for consultation and feedback. We are able to also offer you with free of charge samples to meet your requirements. Best efforts will likely be produced to provide you the best service and merchandise. When you are keen on our business and products, please speak to us by sending us emails or call us quickly. In an effort to know our products and company extra, you may come to our factory to view it. We will generally welcome guests from all over the world to our business to create business relations with us. Please feel cost-free to speak to us for small business and we believe we'll share the best trading experience with all our merchants.

This supplier stick to the principle of "Quality first, Honesty as base", it is absolutely to be trust.
